Your 2006 Winnebago Sightseer 33T motorhome was either built on a 18,000lb or 20,500lb Ford F-53 Chassis. Luckily both chassis will use Mounting Brackets # RM-RBK22. You will also need a Roadmaster Exact Center Steering Stabilizer # RM36RR to go with the mounting brackets.
A Roadmaster Front Anti-Sway Bar # RM-1139-148 can help reduce the body roll that you may be experiencing on the front of your Sightseer. This replaces the factory sway bar for a stronger unit that will help you to... view full answer...
By control board I believe you are referring to the touchpad control, and the correct replacement for the Kwikee Level Best on your Winnebago Sightseer is the following:
- Replacement Lippert Touchpad for Kwikee Level Best Hydraulic Leveling System - Winnebago # LC68UD view full answer...
We do indeed have the replacement foot pad you need for your Lippert Power Gear hydraulic jack; the correct part is the following:
- Replacement Foot Plate for Lippert Power Gear Hydraulic Jack # LC359344 view full answer...
I believe we do have what you are needing with replacement refrigerator vent latches. We offer a couple options, depending on the thickness of your wall.
- Up to 3/16" Thick: Refrigerator Vent Latches - Thick Wall # 372245
- Up to 1/16" Thick: Refrigerator Vent Latches - Thin Wall # 372235 view full answer...
To replace your Parallax 7445 converter you can use the Progressive Dynamics 9200 Inteli-Power Converter # PD9245C. This has the same amperage so you can just reuse the wiring running from the converter to the battery bank. The Parallax 7445 should have a 110v plug on it so it should be a simple swap out to install the # PD9245C. view full answer...
Yes, you can use the Hott Rod RV Water Heater Conversion Kit # DGR10VP with your Atwood GCH10A-4E water heater.
This will convert your water heater from propane to electric, and provides all the installation hardware needed for an easy, fast, installation. view full answer...
We have a universal style weld-on hitch that fits your 2007 Winnebago Sightseer 29R with the Curt Class V hitch part # 15902 but the hitch you mentioned does not fit. view full answer...
What model Jensen radio do you have in your motorhome and what model Jensen radio do you want to replace it with? There are some that can be interchanged without wiring but this is not likely when switching from a stereo without XM radio to a stereo with XM radio. I have attached our selection of RV radio's for you in addition to listing the ones compatible with XM radio below.
Jensen Stereo part # JHD1635BTB
Jensen Stereo part # JHD1630B view full answer...
The Jensen RV stereo part # JWM60A will easily replace the AWM970 you have installed in your 2008 Winnebago Sightseer as they are very similar in overall shape and designed to fit the same size opening. There might be a few variances in how the unit will bolt attach compared to your other stereo but it will easily work as a replacement. view full answer...
We do not carry the Magnadyne MobileVision line of camera systems so I unfortunately do not have a replacement rear camera for your 2011 Winnebago Sightseer. If you need to completely replace the system on your motorhome then I recommend the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen # FOS05TASF.
This wireless backup camera system has a waterproof camera with night vision. The touch screen, anti-glare monitor mounts to your dashboard and... view full answer...
Is it possible the valve stem was damaged on the wheel that only shows 1 lb when you removed the sensor? I'd try pressing the valve to see if it lets out air like normal. My guess is it's damaged or obstructed. view full answer...
There is possibly an option for a trailer hitch that fits your 2004 Holiday Rambler, and I say possibly because while a custom fit hitch is not available, there are universal weld-on hitches. This depends on the width of your frame from outside to outside, so if your frame measures up to 44 inches (from outside to outside), you can use any of the following.
- 3" Drop: Curt Class 5 Universal Weld-on Hitch # 15901
- 9" Drop: Curt Class 5 Universal Weld-on Hitch # C47CR
- 18" Drop: Curt... view full answer...
Sounds like your roof vent lid isn't closing all the way when you ask it to which is why the fan isn't shutting off and also explains the clicking of the operator as it's trying to close it. In the past we've seen similar issues to this turn out to be fixed by replacing the operator with the part # MA10-20281K-1AF which is correct operator for your MaxxAir MaxxFan. view full answer...